Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Custom band clamp corner pad for polygon frames

Workshop & tools

Custom band clamp corner pad for polygon frames

Glue polygon frames with a matching corner pad: customise the interior angle, arm length and strap width, with guide flanges and corner clearance.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
7 adjustable
Variants
0 ideas
The pad contacts the outer faces of two adjacent frame sides. A surrounding strap runs across its back between two guide flanges. The model produces a fixed interior angle from 60 to 150 degrees, without an adjustable mechanism. What you can customise: Adjustable: Workpiece interior angle. Adjustable: Contact arm length. Adjustable: Thickness behind contact faces. How to measure: 1. Measure the finished frame interior angle; a regular hexagon has 120 degrees. 2. Allow clearance around the strap width and choose contact length on both sides. 3. Choose corner relief so the delicate corner tip does not bear on the pad. Assembly and trial fitting: 1. Print on the lower flange and inspect the upper overhang. 2. Fit a matching pad outside every frame corner. 3. Route the strap around the outside through the guides and tension gently by hand. 3D printing notes: PETG with five walls and high infill. Check layer bonding at flanges and the corner connection. Fit and included geometry: Gentle glue-up clamping only. Not for lifting, transport or cargo restraint. Strength is untested; adjustable commercial pads already exist.
Create my part now

Recommendations

Best from Workshop & tools

View all →
Custom corner radius routing template with fences
Custom corner radius routing template with fences
Mark or rout outside corners to your chosen radius: a template with two edge fences, adjustable radius and straight margins for secure clamping.
Magnetic pickup pen with a retractable core for your own magnet – gray; AI product visualization
Magnetic pickup pen with a retractable core for your own magnet
Size the magnet pocket and reach; retract the core to release small steel parts.
Chalk-line coating chamber with a lid for your felt wipers – purple; AI product visualization
Chalk-line coating chamber with a lid for your felt wipers
Coat your loose marking line with suitable chalk-line powder.
Fillable plumb-bob shell with a conical tip and lid – red; AI product visualization
Fillable plumb-bob shell with a conical tip and lid
Make a small hand-held plumb bob with your own line and dry filling.
Custom steel rule stop head
Custom steel rule stop head
Set repeat measurements with your steel rule: customise slot width, thickness and stop height. Uses an existing ruler and a separate clamping screw.
Pair of winding sticks with long sighting edges – gray; AI product visualization
Pair of winding sticks with long sighting edges
Two equal-height sighting sticks for comparing twist in small workpieces.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Werkstatt & Handwerk category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Angle, Length, Wall thickness, Width, Height, Specific dimension. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Werkstatt & Handwerk category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →