Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Pin-feed wheel for perforated component carrier tape – AI product visualization

Enclosures & electronics

Pin-feed wheel for perforated component carrier tape

Advance carrier tape through its hole row: configure pitch, pin count, engagement and shaft bore.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
5 adjustable
Variants
0 ideas
This narrow pin wheel engages the sprocket-hole row of suitable component carrier tape in your own slow hand feeder. Its 2.2 mm wide running surface supports only the perforated edge; component pockets need separate side and radial clearance. Each pin tapers by 0.2 mm towards its end. Measure hole pitch, hole diameter and tape thickness. Pitch multiplied by pin count defines the running circumference: 4 mm and 16 pins give 64 mm. The hub is 8 mm high overall. Tape guides, cover, shaft and shaft fastening must be provided separately. Try the engagement with empty tape first and avoid pressing on component pockets. No machine or ESD compatibility is claimed. Adjustable values: Measured sprocket-hole pitch: 3.8–4.2 mm; Number of feed pins: 12–24; Feed-pin diameter: 1–1.3 mm; Projection above the running surface: 0.8–1.5 mm; Shaft-bore diameter: 3–6 mm. Have your own 3D printer? Configure the dimensions, purchase the STL file and download the 3D model to print yourself. Without a printer, have us make the part: choose a material, calculate the price online, then order and pay online. Geometry has been digitally checked. No physical test print has been carried out. The product image is a photorealistic AI visualization of the default dimensions. Mentioned third-party accessories are not included.
Create my part now

Recommendations

Best from Enclosures & electronics

View all →
Two-piece cable support for rectangular data plugs – AI product visualization
Two-piece cable support for rectangular data plugs
Support the transition from an insulated data-plug body to its cable with two fitted shells.
End-hook puller for suitable socketed DIP components – AI product visualization
End-hook puller for suitable socketed DIP components
Grip suitable DIP components at their accessible short ends and withdraw them evenly from the socket.
Two-row spring probe holder for test fixtures – AI product visualization
Two-row spring probe holder for test fixtures
Ten guide holes position your own spring probes above an open wiring space.
Two-shell filament wiper for your foam insert – AI product visualization
Two-shell filament wiper for your foam insert
Two fitted shells hold your own soft insert for wiping moving filament.
Split filament refill spool with locking ring and removable flange – AI product visualization
Split filament refill spool with locking ring and removable flange
Fit a filament refill coil between a measured core and a removable spool flange.
Assembly nest and pressing plate for matching ribbon-cable connectors – AI product visualization
Assembly nest and pressing plate for matching ribbon-cable connectors
Support matching ribbon-cable connectors during closure and guide the pressing plate. Configure body dimensions, contact clearance and fit.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Gehäuse & Elektronik category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension, Diameter, Height, Bore diameter. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Gehäuse & Elektronik category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →