Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
FDM overhang test with five custom slopes – AI product visualization

Workshop & tools

FDM overhang test with five custom slopes

Five labelled sloping surfaces compare the overhang behaviour of your FDM printer.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
3 adjustable
Variants
0 ideas
Check how your FDM printer handles one-sided overhangs at different angles. Five surfaces, each 8 mm wide and 2 mm thick, rise from a shared base. Choose the starting angle, angular increment and surface length. Defaults produce 25 mm long surfaces at 30 / 40 / 50 / 60 / 70 degrees, measured from vertical and labelled on the base. Print without supports and compare undersides, edges and deformation. Record material, orientation and print profile for a useful comparison, then change individual settings deliberately for the next trial. This checks overhangs, not unsupported bridges between two supports. A part made by us serves as a demonstration piece; to tune your own printer, print the STL yourself. No universal limiting angle is guaranteed. Adjustable values: First angle from vertical: 20–35 °; Angle increment: 5–10 °; Sloped test face length: 15–35 mm. Have your own 3D printer? Configure the dimensions, purchase the STL file and download the 3D model to print yourself. Without a printer, have us make the part: choose a material, calculate the price online, then order and pay online. Geometry has been digitally checked. No physical test print has been carried out. The product image is a photorealistic AI visualization of the default dimensions. Mentioned third-party accessories are not included.
Create my part now

Recommendations

Best from Workshop & tools

View all →
Miniature balsa plane for your blade with a chip mouth – AI product visualization
Miniature balsa plane for your blade with a chip mouth
Small hand plane for light balsa work, with a configurable sole, inclined blade bed and clamp plate.
Bit screwdriver handle with a freely rotating palm cap – AI product visualization
Bit screwdriver handle with a freely rotating palm cap
Turn a hex bit with your fingers while supporting your palm on a separate rotating cap.
Eccentric side clamp for light gluing setups – AI product visualization
Eccentric side clamp for light gluing setups
A side-acting eccentric cam pushes light workpieces against your own fixed stop.
FDM stringing test with two custom tapered towers – AI product visualization
FDM stringing test with two custom tapered towers
Two tapered towers on a shared base for comparing stringing during FDM printing.
Thread fit test with screw and three test nuts – AI product visualization
Thread fit test with screw and three test nuts
One screw and three dot-marked nuts compare radial clearance in printed threads within a single print job.
Hobby sample splitter with six alternating chutes – AI product visualization
Hobby sample splitter with six alternating chutes
Six alternating sloped chutes divide free-flowing hobby granules toward two sides.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Werkstatt & Werkzeuge category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Angle, Specific dimension, Length. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Werkstatt & Werkzeuge category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →