Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Universal joint with two yokes for slow hand models – AI product visualization

Gears & mechanics

Universal joint with two yokes for slow hand models

Two shaft yokes and a separate cross connect angled shafts in a hand-operated model.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
3 adjustable
Variants
0 ideas
Demonstrate a basic universal joint with your own shafts. Mount the two yokes at 90 degrees to each other around the separate cross. Defaults are a 20 mm clear yoke width, 6 mm shaft bores and 12 mm hub height. Yoke ears have 3.4 mm bearing holes; the cross has four blind 3 mm pin sockets. Secure four short metal pins no more than 5 mm into the cross, keeping adhesive away from the moving bearings. Secure your shafts in the hubs as appropriate; radial 3.2 mm holes are provided. Slowly check clearance throughout the intended movement. PETG is one possible material. This is a slow hand model, not a rated machine or vehicle drive; no maximum articulation angle is guaranteed. Adjustable values: Clear yoke width: 16–28 mm; Both shaft bores: 3–10 mm; Shaft hub height: 10–18 mm. Have your own 3D printer? Configure the dimensions, purchase the STL file and download the 3D model to print yourself. Without a printer, have us make the part: choose a material, calculate the price online, then order and pay online. Geometry has been digitally checked. No physical test print has been carried out. The product image is a photorealistic AI visualization of the default dimensions. Mentioned third-party accessories are not included.
Create my part now

Recommendations

Best from Gears & mechanics

View all →
Bevel gear pair for a 90-degree model drive – AI product visualization
Bevel gear pair for a 90-degree model drive
Matched bevel gears for a 90-degree, 1:1 model drive with adjustable module, tooth count and shaft bore.
Four-position Geneva indexing pair for hand operation – AI product visualization
Four-position Geneva indexing pair for hand operation
Four-slot Geneva wheel and pin driver for intermittent quarter-turn motion in a model.
Oldham coupling with two custom shaft bores – AI product visualization
Oldham coupling with two custom shaft bores
Three-piece shaft coupling with a sliding cross disc for small parallel offsets.
Planetary gear set with three planets and two carrier plates – AI product visualization
Planetary gear set with three planets and two carrier plates
Seven printed parts for a hand-operated planetary train with a fixed 4:1 reduction.
Serrated indexing joint pair with mounting tabs – AI product visualization
Serrated indexing joint pair with mounting tabs
Two complementary serrated faces position light assemblies in selectable angular steps.
Custom worm and worm wheel for hand drives – AI product visualization
Custom worm and worm wheel for hand drives
Single-start worm and matching wheel for a slow hand drive with a configurable reduction ratio.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Zahnräder & Mechanik category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension, Bore diameter, Height. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Zahnräder & Mechanik category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →