Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Book stand with inclined back frame and page fingers – AI product visualization

Home & organization

Book stand with inclined back frame and page fingers

An inclined frame supports an open book while two front fingers retain the pages.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
3 adjustable
Variants
0 ideas
Place an open book or instruction manual on your table with a support sized for its format. The one-piece stand has a base plate, three inclined back uprights, two crossbars, rear braces and two fixed front page fingers. Defaults are 160 mm support width, 120 mm back height and a 20-degree lean from vertical. About 25 mm of usable depth is available at the bottom between the front edge and back uprights. Measure your open book; the fixed fingers are not adjustable clamps. Choose print orientation and any supports needed for the crossbars and slope carefully. Check stability with your own book on a level surface. No load rating is specified; intended for light books and manuals rather than heavy volumes. Adjustable values: Book support width: 100–220 mm; Back frame height: 80–180 mm; Lean from vertical: 10–30 °. Have your own 3D printer? Configure the dimensions, purchase the STL file and download the 3D model to print yourself. Without a printer, have us make the part: choose a material, calculate the price online, then order and pay online. Geometry has been digitally checked. No physical test print has been carried out. The product image is a photorealistic AI visualization of the default dimensions. Mentioned third-party accessories are not included.
Create my part now

Recommendations

Best from Home & organization

View all →
Envelope-slitter body for your rectangular blade – AI product visualization
Envelope-slitter body for your rectangular blade
Guide an envelope fold through a narrow entry channel to your own small rectangular blade.
Window squeegee with a clamping strip for your rubber blade – AI product visualization
Window squeegee with a clamping strip for your rubber blade
Clamp a smooth soft rubber blade at your chosen width for wiping flat glass.
Lint-roller handle with a refill axle and screw cap – AI product visualization
Lint-roller handle with a refill axle and screw cap
Use an existing lint-roller refill without its original handle by matching core size, roll width and grip dimensions.
Collar-stay pair with custom length and tip profile – AI product visualization
Collar-stay pair with custom length and tip profile
Size collar stays to your shirt pockets by choosing length, width, thickness and a tapered tip.
Tilt drum for matching Venetian-blind ladder cords – AI product visualization
Tilt drum for matching Venetian-blind ladder cords
Make a matching hex-shaft ladder-cord drum for manually tilted Venetian-blind slats.
Screw-closed pen body for your ballpoint refill – AI product visualization
Screw-closed pen body for your ballpoint refill
Reuse a ballpoint refill: choose its length, diameter, tip opening and your preferred grip size.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Haushalt & Ordnung category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Width, Height, Specific dimension. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Haushalt & Ordnung category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →