Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Custom film strip holder with separate mask for camera scanning

Hobbies, learning & leisure

Custom film strip holder with separate mask for camera scanning

Digitise negatives with a camera: configure film width, image windows and frame spacing. Print the base carrier and matching mask separately.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
9 adjustable
Variants
0 ideas
This two-piece holder positions a short strip above a suitable diffuse light source. Window dimensions and spacing are independent, for small-format or measured medium-format strips. Four separate bolts join base and mask; no camera mount is included. What you can customise: One to five windows within 220 mm overall length. Set film channel and image crop independently. Open ends accommodate longer film tails. How to measure: 1. Measure full width and thickness on a sacrificial strip. 2. Choose image opening across and along the strip. 3. Measure frame centre spacing and check registration across all windows. Assembly and trial fitting: 1. Print both frames; smooth contact edges and remove dust. 2. Lift the mask and load scrap film first; keep image areas clear. 3. Close with four M3 bolt joints; check flatness, focus and stray light. 3D printing notes: Use black PETG for a prototype, fine 0.1 mm layers at contact surfaces and four walls. Print both flat without supports. The film gap is small: measure it and test scrap before using original negatives. Fit and included geometry: Export base and mask separately. Hardware, light source and camera are separate. Not an OEM scanner insert; no glass, guaranteed flatness or scratch-free handling. Curled film may need another holder.
Create my part now

Recommendations

Best from Hobbies, learning & leisure

View all →
Rectangular profile
Rectangular profile
Configure a custom rectangular profile online and adjust Length, Width and Wall thickness to your application.
Desk cable grommet
Desk cable grommet
Configure a custom desk cable grommet online and adjust Diameter, Thickness, Specific dimension and Wall thickness to your application.
Hinge repair plate
Hinge repair plate
Configure a custom hinge repair plate online and adjust Specific dimension and Width to your application.
Universal connector
Universal connector
Configure a custom universal connector online and adjust Specific dimension to your application.
Pipe wall clip
Pipe wall clip
Configure a custom pipe wall clip online and adjust Specific dimension, Wall thickness and Width to your application.
L-shaped angle bracket
L-shaped angle bracket
Configure a custom l-shaped angle bracket online and adjust Specific dimension, Thickness and Height to your application.

FAQ

Frequently asked questions

What is Custom mounting part intended for?

Custom mounting part is a configurable model in the Mounting profiles category. When an off-the-shelf part does not fit, configure this parametric custom mounting part for your project: adjust the dimensions, check the preview, download the STL or order the 3D printed… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Custom mounting part?

The available input fields define the dimensions of the generated model, for example Width, Specific dimension, Length, Quantity, Height, Thickness. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Custom mounting part?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Custom mounting part as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Custom mounting part?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Mounting profiles category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →