Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Screw-clamped end stop for matching DIN rails – AI product visualization

Adapters & connections

Screw-clamped end stop for matching DIN rails

Slide-on end stop with flange hooks and a seat for your M3 clamp screw. Measure and configure rail width and flange thickness.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
5 adjustable
Variants
0 ideas
This end stop limits sideways movement of light modules on a matching DIN rail in a non-critical hobby setup. Two lower hooks engage beneath the outer rail flanges. Slide the body onto a free rail end, then clamp one flange with your own M3 screw and metal nut. Measure overall rail width, flange thickness and available space below the flanges. The default width is 35 mm but does not guarantee a fit on every profile. Insert the nut into the top hex pocket and tighten gently. Check fit and sliding resistance on your print. Only for non-safety low-voltage or demonstration layouts; not a replacement for approved end brackets in electrical distribution equipment. Adjustable values: Measured outside rail width: 30–40 mm; Rail-flange thickness: 0.8–1.5 mm; Engagement under rail flanges: 2–4 mm; Width along the rail: 8–18 mm; Stop-body height: 12–25 mm. Have your own 3D printer? Configure the dimensions, purchase the STL file and download the 3D model to print yourself. Without a printer, have us make the part: choose a material, calculate the price online, then order and pay online. Geometry has been digitally checked. No physical test print has been carried out. The product image is a photorealistic AI visualization of the default dimensions. Mentioned third-party accessories are not included.
Create my part now

Recommendations

Best from Adapters & connections

View all →
Bell crank for your own light lid linkages – AI product visualization
Bell crank for your own light lid linkages
Redirect two light lid-linkage rods with a flat right-angle lever.
Sliding bolt with guide and keeper for light boxes – AI product visualization
Sliding bolt with guide and keeper for light boxes
Close a light box with a sliding bolt and keeper matched to your available space.
Split mount for your own cylindrical furniture damper – AI product visualization
Split mount for your own cylindrical furniture damper
Position your own cylindrical furniture damper on a suitable mounting surface. Set body diameter, length, height and mounting-row spacing.
Pivot-cam webbing clamp for light textile organizers – AI product visualization
Pivot-cam webbing clamp for light textile organizers
Release and reclamp a light organizer strap with a pivoting eccentric lever.
Flexible screw-retaining washer with radial fingers – AI product visualization
Flexible screw-retaining washer with radial fingers
Custom slotted TPU washer that can keep a withdrawn screw with a removable cover.
Dovetail changeover base with a hand clamping screw – AI product visualization
Dovetail changeover base with a hand clamping screw
Removable mounting base for light tabletop fixtures, with a dovetail guide, separate mounting faces and a printed hand screw.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Adapter & Verbindungen category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Width, Thickness, Depth, Height. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Adapter & Verbindungen category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →