Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Custom glue-on repair eye for a blind tilt wand

Gears & mechanics

Custom glue-on repair eye for a blind tilt wand

Broken eye on a blind tilt wand? Configure a glue-on repair head with a matching rod socket and hook eye, for sound round manually operated wands.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
6 adjustable
Variants
0 ideas
This one-piece head connects a surviving round tilt wand to a suitable existing hook. Its blind socket is bonded with a separately selected compatible adhesive. Measure socket diameter, insertion depth and eye size; test the actual bonded joint. What you can customise: Match socket to rod and adhesive gap. Choose eye diameter and thickness separately. Reuse the sound remainder of the wand. How to measure: 1. Measure the round rod and available sound bonding length. 2. Compare hook clearance with eye hole and thickness. 3. Set clearance to adhesive requirements and check headrail clearance. Assembly and trial fitting: 1. Print a trial head, clean the bore and dry-fit it. 2. Use a material-compatible adhesive according to its instructions and let it cure. 3. Hook the eye on; test light hand torque and free articulation first. 3D printing notes: Start with PETG, 0.2 mm layers and five walls. Flat underside on the bed. The horizontal socket needs a short bridge; check and clean a trial bore. Adhesive is separate. Fit and included geometry: Only for manual tilt wands and suitable hooks. Not a motor shaft, lift control or safety coupling. Bonding, solar heat and repeated turning are not physically tested. A complete spare wand may cost less.
Create my part now

Recommendations

Best from Gears & mechanics

View all →
Custom Belt Pulley / Timing Pulley
Custom Belt Pulley / Timing Pulley
Parametric belt pulley with flanges, tooth profile and selectable shaft bore.
Custom concave guitar fingerboard radius sanding block
Custom concave guitar fingerboard radius sanding block
Work on a fingerboard with an unusual radius: set the concave block radius, width and length for hand sanding with a separately bonded abrasive strip.
Custom two-slot webbing slide for light sewing projects
Custom two-slot webbing slide for light sewing projects
Webbing will not fit a standard slide? Configure width and clearance for two strap layers, for light sewing projects, fabric pouches and organisers.
Custom case latch strap for separate metal axle
Custom case latch strap for separate metal axle
Broken latch on a light storage case? Configure strap width, metal axle bore and hook distance, measuring the existing lid catch and hinge space first.
Custom split clamp-ring lens focus lever
Custom split clamp-ring lens focus lever
Add a finger lever to a manual focus ring: configure diameter, ring width and lever reach using two clamp halves with separate thin protective liners.
Custom zipper pull with finger opening and cord eye
Custom zipper pull with finger opening and cord eye
Zipper tab too small or broken? Create a pull with a custom finger opening and cord hole, for a zipper slider with an intact attachment eye.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Mechanik category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension, Depth, Wall thickness, Thickness. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Mechanik category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →