Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Custom round slip-on lens hood – purple. AI visualization of default dimensions.

Hobbies, learning & leisure

Custom round slip-on lens hood

Create a lens hood STL by setting the collar diameter, length and flare, then 3D-print it for your lens.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
3 adjustable
Variants
0 ideas
This round lens hood slides over a cylindrical outer ring of the lens. Configure the collar fit and flared hood using the measured external dimensions. The model has neither a filter thread nor a bayonet mount. Adjustable dimensions: Clear collar diameter 35–95 mm; Length above collar 15–50 mm; Diameter flare 6–20 mm. For a cylindrical, non-rotating outer barrel without covering controls. Enter the clear collar bore including fit allowance. Allow for a separate soft lining if used. Check hood length and opening for vignetting across the whole image. Gray or colored material can cause reflections; verify optical performance. Not a solar filter or protective device. Print narrow collar down. Print starting point: PETG, 0.2 mm layers, four perimeters. Print in the supplied orientation. Check dimensions and fit against your own item. Image: AI visualization of default dimensions; accessories not included. STL download or 3D-print order: configure the dimensions and check the preview. After purchase, download the generated STL file to print it yourself. To order a finished print, check that the print service offers the material required for this application. Accessories are not part of the model.
Create my part now

Recommendations

Best from Hobbies, learning & leisure

View all →
Custom slip-on Bahtinov focusing mask
Custom slip-on Bahtinov focusing mask
Configure a Bahtinov mask for your telescope tube: choose mounting diameter, slit pitch and collar height, with measuring and printing guidance.
Gel filter frame for custom flash heads
Gel filter frame for custom flash heads
Hold a cut colour gel in front of a small flash. Match light window and insertion gap to gel and flash head. Set your dimensions, 3D print and check the fit on the.
Flash bounce-card holder with elastic-band channel – red. AI visualisation of the default dimensions.
Flash bounce-card holder with elastic-band channel
Attach your own white bounce card to an upward-pointing speedlight.
Star bokeh mask with a handling tab for the lens front – grey. AI visualisation of the default dimensions.
Star bokeh mask with a handling tab for the lens front
A five-pointed aperture with configurable disc and star sizes.
Slide mount assembly nest for custom frame sizes
Slide mount assembly nest for custom frame sizes
Position loose slide mount halves during film assembly. A stepped pocket supports the frame and leaves the image area open.
Custom 35 mm film-leader outline template – red. AI visualization of default dimensions.
Custom 35 mm film-leader outline template
Mark a film leader with a custom narrow length, remaining width and transition length for your camera.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Optik & Fotografie category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension, Length. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Optik & Fotografie category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →