Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Scissor height platform with clamping guide axles – AI product visualization

Hobbies, learning & leisure

Scissor height platform with clamping guide axles

Adjust the height of light tabletop models using two side scissor linkages.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
3 adjustable
Variants
0 ideas
Two platforms and four arms form a manually adjustable stand. Defaults are 60 mm platform width, 65 mm arm hole spacing and 4 mm axle screws. The resulting plate length is 93 mm. Assemble the platforms with their guide walls facing inward. Four of your own long axle bolts join the end pivots across the width; two shorter bolts join the central pivots. Washers separate moving surfaces and locking nuts retain the joints. The outside nuts on the two slotted axles clamp the position. Hold the unloaded top plate while adjusting and clamp both sliding axles before placing an object on it. At arm angles of 20–60 degrees, the calculated default height is about 44–78 mm. For light, non-fragile tabletop models on a stable surface. No load rating is specified; not a vehicle or machine jack, or a platform for hot equipment or liquids. Adjustable values: Platform width across the arms: 40–90 mm; Scissor arm hole spacing: 45–90 mm; Diameter of your axle screws: 3–5 mm. Have your own 3D printer? Configure the dimensions, purchase the STL file and download the 3D model to print yourself. Without a printer, have us make the part: choose a material, calculate the price online, then order and pay online. Geometry has been digitally checked. No physical test print has been carried out. The product image is a photorealistic AI visualization of the default dimensions. Mentioned third-party accessories are not included.
Create my part now

Recommendations

Best from Hobbies, learning & leisure

View all →
Lens tube with focusing thread and separate retaining ring – AI product visualization
Lens tube with focusing thread and separate retaining ring
Three-part lens tube for manually focusing your own lens, including a matching threaded retaining ring.
Slide-in holder for loose round filters on an optical bench – AI product visualization
Slide-in holder for loose round filters on an optical bench
A removable drawer changes a loose round filter in your own tabletop optical setup.
Round token magazine with bottom dispensing slot – AI product visualization
Round token magazine with bottom dispensing slot
Round stack magazine for sliding matching tokens out individually through the lower front opening.
Three-piece spiral reel for short film strips – AI product visualization
Three-piece spiral reel for short film strips
Wind short film strips with separated turns, choosing film width and spiral spacing.
Photographic print drying rack with five open slots – AI product visualization
Photographic print drying rack with five open slots
Drain washed RC photographic prints separately with an open path for air.
Flexible guitar soundhole cover with neck clearance – AI product visualization
Flexible guitar soundhole cover with neck clearance
Flexible cover for a measured guitar soundhole, with an insertion collar and optional fretboard clearance.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Hobby, Lernen & Freizeit category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Width, Length, Specific dimension. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Hobby, Lernen & Freizeit category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →