Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Screw pinch clamp for soft gravity-fed tubing – AI product visualization

Garden & plants

Screw pinch clamp for soft gravity-fed tubing

Adjust a soft tube by hand in small gravity-fed watering setups.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
5 adjustable
Variants
0 ideas
A frame, adjustment screw and loose pressure shoe form the tubing clamp. Feed your own soft, unreinforced tube through the opening and place the shoe above it. The screw tip sits in its recess; lift the shoe by hand if it does not release as the screw is backed out. The broad contact face compresses the tube. Tube hardness and wall thickness determine how much its flow can be changed. Use only for small, supervised gravity-fed water setups. No calibrated dosing, pressure-rated shut-off or lasting leak-tightness is promised. Unsuitable for gas, compressed air or medical use. Adjustable values: Soft-tube outside diameter: 4–10 mm; Pinch-face length along the tube: 14–26 mm; Pressure-shoe thickness: 3–6 mm; Adjustment-screw pitch: 1.5–2.5 mm; Radial thread clearance: 0.2–0.4 mm. Have your own 3D printer? Configure the dimensions, purchase the STL file and download the 3D model to print yourself. Without a printer, have us make the part: choose a material, calculate the price online, then order and pay online. Geometry has been digitally checked. No physical test print has been carried out. The product image is a photorealistic AI visualization of the default dimensions. Mentioned third-party accessories are not included.
Create my part now

Recommendations

Best from Garden & plants

View all →
Air-layering box halves with custom stem openings – green. AI visualisation of the default dimensions.
Air-layering box halves with custom stem openings
Two identical box halves enclose moist moss or another suitable rooting medium around an attached branch during air layering.
Paper seedling pot maker with custom pressing base – green. AI visualisation of the default dimensions.
Paper seedling pot maker with custom pressing base
Wrap a paper strip around the cylinder, fold the lower overhang inward and press the bottom against the separate base.
Rim bridge with an open channel for a watering wick – green; AI product visualization
Rim bridge with an open channel for a watering wick
Guide your own wick over a pot rim: set rim width, leg depth and channel size.
Leaf-cleaning tongs for your soft cleaning pads – AI product visualization
Leaf-cleaning tongs for your soft cleaning pads
Two broad pad carriers for gently wiping smooth plant leaves, sized for your project.
Split watering ring with soil collar for planters – AI product visualization
Split watering ring with soil collar for planters
Define the watering area in a planter with a split ring and visible insertion mark.
Three-point bending holder with an adjusting screw for slender shoots – AI product visualization
Three-point bending holder with an adjusting screw for slender shoots
Gently position a thin, flexible plant shoot between two outer support points.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Garten & Pflanzen category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension, Length. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Garten & Pflanzen category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →