Hydraulics without waiting: custom adapters, sleeves, tees & flanges in minutes
A small hydraulic part is missing - and suddenly everything stops. Standard parts don't fit, delivery times are long, or you need an interim solution for a conversion. This is exactly where a parametrischer configurator: You enter the dimensions, get a suitable model - without CAD.
Quick start: which 3 dimensions are often enough?
- Inside Ø (flow / fit)
- Outside-Ø (wall thickness / stability)
- Length (installation space)
For flanges additionally: Bolt circle (center to center), bores-Ø and number boreen.
The 5 parts that most often save the day
If protection, guidance or a defined cross-section is missing, set the tube dimensions and you’re ready.
🚀 Configure
Define both ends separately — ideal for a precise transition from small to large.
🚀 Configure
Dimension the main tube and branch separately: length and inner/outer diameter in each direction.
🚀 Configure
Incorrect screw holes prevent assembly. Measure the bolt circle accurately for a good fit.
🚀 Configure
Tidy fastening instead of tangled cable ties — with plate dimensions, hole diameter and optional countersink.
🚀 ConfigureToleranz-Quickguide (dawith’s montierbar bleibt)
| application | Guideline game | Tip |
|---|---|---|
| Through bore | +0.2 to +0.6 mm | Je nach printer/material |
| Push/Push fit | +0.3 to +0.8 mm | Print test piece first |
| Clamping | 0 to +0.3 mm | Wall thickness influences holding force |
Get started right away
Hydraulic parts are often simple when the dimensions are right. Choose a suitable template and enter your values.