Adapters & connections

Extend a remaining round screw-boss stub with a fitted sleeve and new screw pilot.

Guide two clear PCB edges in fitted channels and screw the rails to your enclosure.

Rest a filter case corner on a fitted support. Parametric STL model with adjustable dimensions for 3D printing.

Customizable mounting plate for 2020, 3030 and 4040 aluminum extrusion profiles.

Customizable pipe connector with two mounting flanges and screw holes.

Customizable pipe and hose adapter with mounting flange.

Customizable machine foot with screw hole and recessed pocket.

Customizable mounting adapter from round pipe to flat slot connection.

Customizable adapter from a rectangular port to a round pipe.

Customizable spacer with slotted hole for flexible mounting.

Customizable mounting plate with grid holes for devices, modules and brackets.

Customizable spacer with center hole and optional base.

Customizable wall and panel passthrough for pipes, hoses and dust extraction.

Custom slotted TPU washer that can keep a withdrawn screw with a removable cover.

Route a separate strap beside a supported battery holder. Parametric STL model with adjustable dimensions for 3D printing.

Two screw-fastened frames retain the clear edges of your display PCB; adjust the window and PCB seat separately.

Join three perpendicular sides of a light hobby enclosure at one corner.

Rigid end-slide adapter for light enclosures, with adjustable rail width, lip thickness and outer fixing pitch.

Space a compatible module plate away from its mounting surface. Parametric STL model with adjustable dimensions for 3D printing.

Ease a matching plug-in board out using a small lever at its edge.

Customizable 3D-printable hinge with screw holes, adjustable length, width, pin size and tolerance.

Support a small panel opening resiliently around a separately selected screw sleeve.

Configure a custom l-shaped angle bracket online and adjust Specific dimension, Thickness and Height to your application.

Store drills with matching shank diameter in an orderly row. Parametric STL model with adjustable dimensions for 3D printing.

Replace a shock mount inner ring: adapt diameter, height, cord holes and clamp screw. Reuse the outer frame and add separate soft protective padding.

Custom wall mount adapter for vacuum cleaners and charging systems.

Position your own cylindrical furniture damper on a suitable mounting surface. Set body diameter, length, height and mounting-row spacing.

Configurable hex adapter with two independently selectable NPT or BSPP G male threads.

Parametric hydraulic tee with three independently sized ports and optional internal threads at each position.

Configurable impeller for small oil, water and liquid pumps with curved blades and a D-shaft socket.

Parametric fan grille for 80mm, 92mm, 120mm and 140mm fans.

Parametric vent cover with staggered hole pattern and optional mounting holes.

Parametric pipe end cap with ventilation slots and rounded protective edge.

Parametric ventilation grille with outer flange, optional holes and countersinks.

Tapered adapter from a large round opening to a pipe or hose outlet with mounting plate.

Parametric pipe cover with spoke grille, centering ring and optional mounting holes.

Configure a dust extraction blast gate to your hose diameter. Print two matching housings and one sliding blade, with measuring and assembly guidance.

Configure a kitchen plinth clip to suit your leg diameter and plinth offset. Screw the plate to the back of the panel and snap the clip onto the round leg.

Configure a replacement control knob for a D, round or square shaft. Adjust shaft size, socket depth, grip dimensions and indicator direction for 3D printing.

Mount a small ferrite toroid on your own test board while leaving wire routes open.

Enlarge the grip of a compatible low-voltage plug housing. Parametric STL model with adjustable dimensions for 3D printing.

Match the opening, mounting height and screw positions to your pickup and flat guitar top.

Two separate side supports with rear stops and outer screw flanges, sized for laptop thickness and installation depth.

Attach a light fabric grille frame with removable custom-sized stud-and-socket pairs.

Mount your potentiometer by its threaded bushing and locating pin on a light control panel.

Rest a loose rectangular plug in a fitted storage cradle. Parametric STL model with adjustable dimensions for 3D printing.

Keep your screw attached to a light cover while it is loosened and moves back axially.

Let your hex nut move sideways to accommodate small hole offsets in light covers.

Open mounting frame for small hobby servos, with two flange holes, four supports and two external fixing holes.

Match a single rectangular keyswitch opening to your switch body and retaining clips.

Custom seat for an insulated socket housing, with a smaller front opening, rear cable outlet and four fixing holes.

Configure a custom 2020/2040 profile corner connector online and adjust Specific dimension and Length to your application.

Configure a custom din rail strip online and adjust Length, Bore diameter and Wall thickness to your application.