Skip to main content
BuildYour3D logo
BuildYour3D
📤 Upload a file 🧩 Create a spare part 📸 Photo → Relief 🧱 Map → 3D model
Flat keycap with adjustable cross-shaped socket – grey. AI visualization of default dimensions.

Gears & mechanics

Flat keycap with adjustable cross-shaped socket

Replace a square keycap: configure width, height and cross size.

0 Likes
★★★★★
0.0/5 · 0 Ratings

STL file: Price currently unavailable.

Finished 3D print: calculate the price after creating your model.

Create my part now ← Back to category
parameters
3 adjustable
Variants
0 ideas
Blank single keycap with 1.4 mm walls, 1.6 mm top and central socket. Cross slot width is fixed at 1.25 mm; insertion depth equals height minus 2.7 mm. Measure overall cross size on your switch. No general brand or profile compatibility claim; check travel and neighbouring key clearance and never force onto the stem. Print top face down. Use a fine nozzle and trial fit for the small socket. Adjustable dimensions: Square cap outside width: 14–24 mm; Overall height: 6–12 mm; Cross tip-to-tip size: 3.8–4.8 mm. 3D printing: start with PETG, 0.2 mm layers and at least four perimeters. Use the STL orientation; check fit and finish before use. Configure the dimensions and purchase the STL model for home printing, or check a print quote for a suitable material. Image: photorealistic AI visualization of default dimensions, not a photograph of a test print. Accessories are not included.
Create my part now

Recommendations

Best from Gears & mechanics

View all →
Custom Belt Pulley / Timing Pulley
Custom Belt Pulley / Timing Pulley
Parametric belt pulley with flanges, tooth profile and selectable shaft bore.
Custom concave guitar fingerboard radius sanding block
Custom concave guitar fingerboard radius sanding block
Work on a fingerboard with an unusual radius: set the concave block radius, width and length for hand sanding with a separately bonded abrasive strip.
Custom two-slot webbing slide for light sewing projects
Custom two-slot webbing slide for light sewing projects
Webbing will not fit a standard slide? Configure width and clearance for two strap layers, for light sewing projects, fabric pouches and organisers.
Custom glue-on repair eye for a blind tilt wand
Custom glue-on repair eye for a blind tilt wand
Broken eye on a blind tilt wand? Configure a glue-on repair head with a matching rod socket and hook eye, for sound round manually operated wands.
Custom case latch strap for separate metal axle
Custom case latch strap for separate metal axle
Broken latch on a light storage case? Configure strap width, metal axle bore and hook distance, measuring the existing lid catch and hinge space first.
Custom split clamp-ring lens focus lever
Custom split clamp-ring lens focus lever
Add a finger lever to a manual focus ring: configure diameter, ring width and lever reach using two clamp halves with separate thin protective liners.

FAQ

Frequently asked questions

What is Configurable 3D component intended for?

Configurable 3D component is a configurable model in the Mechanik category. When an off-the-shelf part does not fit, configure this parametric configurable 3d component for your project: adjust the dimensions, check the preview, download the STL or order the 3D… It is suitable as a starting point for 3D printing or technical review.

Which dimensions can I adjust for Configurable 3D component?

The available input fields define the dimensions of the generated model, for example Specific dimension. Please check the preview and the displayed overall dimensions before ordering.

Is the STL generated from my inputs?

Yes. The STL is generated from the entered parameters and prepared for download or email delivery after payment.

Can I open the STL in Bambu Studio, Cura or PrusaSlicer?

The generated STL is suitable as a starting point for common slicers. Please review orientation, scale, material and print settings in your slicer software.

Do I need to check dimensions and tolerances before buying?

Yes, please check dimensions before ordering. Fit, strength and tolerances depend on material and print settings; the preview and overall dimensions help with verification.

Which material is suitable for Configurable 3D component?

PLA is useful for samples and simple parts, PETG for tougher applications and ASA for outdoor or higher-temperature use. Load, tolerance and print orientation matter.

Can I download Configurable 3D component as an STL or order it printed?

Yes. After configuration you can use the generated model for STL download or continue to the 3D printing order flow with price calculation.

What are typical uses for Configurable 3D component?

Typical uses include custom dimensions, repairs, prototypes and mounting aids in the Mechanik category. For functional parts, always verify load and fit in the final application.

Ratings

What andere sagen

★★★★★
0.0/5 · 0 Ratings

Submit rating

Please enter your name, email address, star rating and comment.

Used only to prevent spam; stored as a hash.

★★★★★

Up to 5 images, JPG/PNG/WebP, maximum 5 MB per image.

Latest reviews

No reviews yet — be the first 🙂

Minimum order value not yet reached

Physical 3D prints require a minimum order value of €10.00. You still need . Digital STL files and shipping costs do not count toward the minimum order value.

You can select more products or increase the quantity of an existing 3D print.

Continue shopping Increase quantity

Photo to 3D

What would you like to create? Choose an option – you will upload your source on the next page.

Example of a 3D relief created from a photo Photo to ReliefTurn your photo into a tactile 3D relief.Proven relief configurator · STL or printed partStart now → Example of a personalized 3D figurine created from a photo Photo to FigurineTurn your photo into a personalized 3D figurine with individual shape and color.Turntable preview · print or digital STLStart now → Floor plan and the spatial 3D model created from it Floor Plan to 3DTurn your floor plan into a spatial 3D model with detected walls and openings.Review preview · confirm recognition and assumptionsStart now → Technical drawing and the 3D part created from it Drawing to 3DCreate a printable 3D model from a technical drawing when geometry and dimensions can be identified clearly.Review preview · verify dimensions and viewsStart now →